Visualizza ingrandito

REGOLATORE WATER RESIS. SCALER CRAWLER FORWARD/REVERSE COMANDA 2 MOTORI LIMITE 30 T CON DRAG BRAKE LIPO 4S NI-MH 17V

Modello ESCBRUS

Condizione Nuovo

1 Articolo Articoli

Invia ad un amico

Invia ad un amico

REGOLATORE WATER RESIS. SCALER CRAWLER FORWARD/REVERSE COMANDA 2 MOTORI LIMITE 30 T CON DRAG BRAKE LIPO 4S NI-MH 17V

Destinatario :

Nome del tuo amico ^* :

Indirizzo email del tuo amico ^* :

^* Campi richiesti

o Annulla
Stampa

60,00 €

60,00 € per 1

Quantità

Aggiungi alla lista dei desideri

Dettagli

Il regolatore è il controller perfetto per il motore brushed PER AUTO 1:10 IDEALE PER SCALER E CRAWLER .

PUO COMADARE ANCHE DUO MOTORI, SI UTILIZZA AANCHE NON UN SINGOLO MOTORE LIMITE 30T

The use of high-voltage power transfer can brush motor glow with the same power and speed. Voltage upgrade directly increases the speed and torque performance improvement brought unimaginable!

On 4S high power lithium spend a little to upgrade the number of large C!

Brush broke out the a Brushless level of power.

Product features:

Volume :45mm x 31mm x 20mm

Weight: 88g

BEC :5V / 1A

voltage :6V ~ 17V

Dual motor connector easily drive more than two 30T motor

Drag brake function is not to throttle ESC automatically brakes, can effectively prevent climbing car uphill or downhill, the car moved because of inertia.

The smooth operation of the output power of the PWM modulation, the modulation frequency is 3KHz, greatly enhancing the motor from the low speed to high running smoothness, especially in low speed motor operation is very smooth linearity.

The low internal resistance output by carefully selected low internal resistance of high-power FET, ensure the power surge. Full aluminum case design, the overall use of the effective thermal conductivity of electronic sealant waterproof and effective help dissipate heat.

Adaptive midpoint governor can automatically adapt to the (detection) midpoint position. Regardless of the midpoint of the remote control to fine-tune the pull rod in what position, it can be in that position for the midpoint forgot to fine-tune the offset so will not generate action to avoid the troubles of the mid-point adjustment.

Caratteristiche

Ideale per	Scaler/Rock crawler 1:10
Tipo motori	Brushed
Voltaggio funzionamento	12 NiXX / 4S LiPo
Limite motore	30T
Corrente di picco
BEC	5V / 2Amp
Retromarcia	Si
Freno	Si